micsit1, mine has started working after shutting the machine and computer down and restarting several times, but it is not as smooth as the one on my tormach mill. This one seems to have dead spots. I can turn the ring a little and it will move slowly, but if I turn the ring a little more it will stop. If I turn it a little more it will start at a little faster speed and so on. I am going to swap the shuttles tomorrow and see if I get the same response. I am not sure if the problem is with the shuttle or with Mach3. Will keep you informed. Hope you get yours working. I love the one on the mill. Makes setups a breeze.
Barry |