I was just pointing out the compatibility issue with the CAM so some poor sole doesn't buy a CAM CD and find out it doesn't work with their version of TC. I just got a CNC mill and hope to get some use out of the TC CAM and the "lite" DNC program included with it. Going to route the DNC to a Dynapath Delta 20 controller with a wireless Serial Device Server...or so is the plan. Hope I can figure out how to set up the machine in the CAM....lots of new ground to cover. Of course, a used CNC mill is like a used car...so the ball screws are all torn out right now waiting on new balls to replace the worn out ones....
__________________
MechWerks |