B+ axis Over Travel fault | |
I see you guys are talking about Kia's . I have a Kia SKT15 lms and I am getting a Fault ( 500 over travel : +B ) . after the machines Homes. Does anyone Know what the problem might be. Last year I had a Similar problem with a -B over Travel fault and it was a proximity sensor, and the machine would'nt run. this time I checked the proximity sensors and they seem ok and the machine will still run after you clear the fault. Leading up to this problem the machine was running a few days ago and the B axis lost it's position slightly and bumped the cutoff tool and kept running with the error. I reset the B axis offset and it ran for another day and it happened again but with the error in the other direction this time. Has anyone experienced this before.
Thanks David N |