Originally Posted by moldmker  It can be done.
Used Extrude Curve with draft to form single knurl point.
Translate and rotate to position correctly to axis.
Rotate with copy to form single row of knurl points.
Translate/rotate to form second row.
Translate copy to repeat pattern along length of axis.
Create Planar Surface caps on ends.
Stitch all to single solid.
.500" dia x .800" long.
4 mb file size.
Good luck |
Using Alibre or BobCAD?
__________________
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com |