Thanks. I found a bunch of stuff on Gibbs website. The big problem is the only seat of Gibbs is on the shop floor right between 2 Mazak lathes (one with a very noisy main spindle). Not the best place to be when trying to concentrate on something new. Im realy hoping the owner sends me to Gibbs classes. We'll see.
Rfstar: If you go here:
ftp://www.ppcadcam.com/Mastercam_for...ified_uploads/
There are 2 files called WCS tutorial something. Look at them and it will explain very well how to use the MC WCS feature and t and c planes. This is an ftp site run by
www.emastercam.com which is a great resource for MC info.