Originally Posted by tikka308  I'm new to using offsets in Mach 3 and want to start running some of my CAM based on a G55 offset. How can I change BobCAD to export my GCode as a G55 offset (versus the default G54)? |
You really don't need to do that. All you need to do is a Find and Replace in the Editor or in NotePad/WordPad.
Find:G54
Replace with: G55
__________________
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com |