Hi,
Thanks for your reply's. The problem is this:
My grex-loader never detects the g100. If I enter the Ip address manually and click launch firmware loader it will open a internet explorer page and I can upload the firmware without any problems. The grex loader will never detect the g100, not on the network via a router and not when connected with a cross cable. In both situations I can ping the g100 without problems and I can reach the upload page with internet explorer. Mach also never connects to the G100, it times out.
I get the feeling that something may be wrong with the G100. It was bought more then one year ago and never used until now. i can think of anything more to try.
All your suggestions are more then welcome. I like the get this thing running. (it's to expensive as an paperweight!)
Thanks |