Feel free to post those engravings on the CamBam forum. If it wasn't for CamBam they and an entire garage full of other engravings wouldn't exist. Its time for a garage sale.... :-).
Thats a great Idea using a V-Cutter and doing an inside profile. I'll have to get a couple V-cutters and give it a try. Sounds like some neat possibilities.
I agree with you about stickfonts. The only reason I use stickfonts is because with a small bit I can do smaller text letters. I engrave on wood and as such other fonts that cut on the outside perimeter of a letter have a tendency to tear out sections of the letters especially with when the text is small even when Z is set shallow. With one pass fonts I don't have tearout problems. Wood can be difficult at times.
I'll check out the links you provided below. Thank you..... II plan on trying CamBAm+ within a week or so. I look forward to it... |