Originally Posted by pminmo http://webpages.charter.net/pminmo/cncelectronics.htm
Two Simple Unipolar drivers (single sided for the DIY Toner Transfer folks)Two Choppers L297-8 combo, Allegro A3987.
A Simple Break Out Board (single sided for the DIY Toner Transfer folks)
A Opto Isolated BOB is in work.
Eagle files are available if not posted on the website.
Phil  |
I added a link here to your site- http://cnczone.com/modules.php?name=...nkinfo&lid=193
__________________
Thank You,
Paul G
Site Owner-Webmaster-
Administrator
www.rfqwork.com
www.cnczone.com
www.welderzone.com |