03-10-2008, 04:38 PM
|
| | | Join Date: Dec 2003 Location: Nottingham, England
Posts: 235
| |
Originally Posted by BrassBuilder  Yep. That was the problem. Got that fixed.
NOW...how do I tell the program what depth of cut for the cutter bit to take for each pass? I can generate the G-Code but it is based on one huge pass. I don't think that will work very good. I want to set up the cutter (1/8" carbide) to make around a .030 pass on each cut as it makes it way through.
Mike | http://www.cnczone.com/forums/showthread.php?t=52517
Post number 4
John S. |