Hi there,
I recently got a TM3 and Thermaldynamics 151 and built a solid table for it. I had to make an extra bracket with an extra bearing for the gantry which greatly increased stability on the lower side of the table, however I cant seem to get the circle cutting sorted. I have very little backlash on both axis now and have been trying many combinations on the settings but they look more like eggs than circles, we are in metric land so I converted the machine settings as in the documentation but I was wondering would anyone post their settings for max feedrates, ramp speed, max conturing speeds etc. When changing materials the only settings I change are the feedrate and amps/ tips. for example 5mm mild steel 1800mm/min feed at 60Amps.
Any help would be appreciated.
Gordon |