Gncc50,
Thank you for the response. Yes, my machine is equipped with a 1.44M floppy. I was under the impression that is is easy to surpass 1.44 megs with a large 3D part program.
Check your PMs.
tstom,
The EMI guys have been great despite what others have experienced. I've been saved by them for a Z axis board, another occasion for spindle encoder. It cost big $$$$$ but I was never down for more than 72 hrs.
machintek,
I just picked up a 540 meg HD from a friend who deals in legacy hardware on ebay. I was considering going ahead and configuring this hard drive with win 3.11, and everything else. Then I would still have my current hard drive as a "quick switch" backup. Of course, the parameter files would need to synchronized if anything was changed in the meantime.
Thanks for the replies, great forum! |