Metlmunchr,
We have resolved this problem. We replaced the spindle encoder and repeated the same tests. Everything returned to normal. I'm not sure where the error was coming from since the tech did check this when he was in, I'm just glad to get the problem resolved. I hate having to "fudge" programs to get something to work. We do a lot of repeat work here and sometimes that repeat work doesn't go on the same machine. It usually plays havoc on setup times. I appreciate your input to the post. Seems like you have some good idea's that I will keep in mind for future reference. Next time I have a CNCZONE posted problem I will put a follow up as to how it was resolved.
Gunner
__________________
Gunner |