Originally posted by metlmunchr
It might also be worthwhile to check into some of the DeskCNC products as well to see if they offer continuous contouring. |
DeskCNC is in continuous contouring mode by default.
The DeskCNC controller software includes probing directly to an .STL surface, rotary or slaved 4th axis, and CAM programming all in one.
http://www.imsrv.com/deskcnc
Hardware options include a 4 axis stepper driver board ($50), 2 amps @ 35v, and step controlled closed loop servo drivers rated at 30V and 5 amps ($65 each axis).
An inexpensive contact probe/tool setter is available, and some inexpensive/discounted bundled kits with motors and control systems are at:
http://www.imsrv.com/deskcnc/bench_top_cnc_systems.htm
Fred Smith - IMService
http://www.cadcamcadcam.com