Originally Posted by holbieone  i don't know what your control is like but our tnc 426 has battery back up for the scales
when they went dead we had the same errors you have |
holbieone,
I checked the batteries and they are good, in fact I removed them and let the machine set overnight so that i could re-enter the parameters. As George stated in the post I may have a lagging problem. Just need to figure how to correct that issue. The biggest thing that has me confused is that all this happen when I lost the parameters, due to shutting the machine down from the phase converter without shutting the machine off first. Thanks for your input.
ben