A new tool to fill gaps in triangle mesh models


Results 1 to 6 of 6

Thread: A new tool to fill gaps in triangle mesh models

  1. #1
    Registered aiem's Avatar
    Join Date
    May 2011
    Location
    Russia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Post A new tool to fill gaps in triangle mesh models

    Ladies and gentlemen,
    a new tool to fill gaps in triangle mesh models, especially in models obtained from scan data, is available: Triangle Mesh Completer by Alexander Emeljanov. 3D tools - Rhinoceros plug-in & standalone program.
    Currently it is released as a plug-in for Rhino 4.0 ( Modeling tools for designers ) and as a standalone utility as well. The last one is intended to use with a proper mesh viewer / editor that supports the .OFF file format (for example: freely distributed MeshLab: MeshLab | Download MeshLab software for free at SourceForge.net ). If you have any questions concerning this tool, please feel free to ask.

    Regards,
    Alexander

    Similar Threads:
    Alexander


  2. #2
    Registered aiem's Avatar
    Join Date
    May 2011
    Location
    Russia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default new release

    Hi all, version 1.05 has been released. In this release a 64-bit version of the standalone utility is added. The main difference from the previous version is a more flexible and efficient implementation of the filtering step (the corresponding topic has been added to the manuals). In general, the repairing becomes more robust and in some cases faster.
    With the best regards,

    Alexander


  3. #3
    Registered yolklab's Avatar
    Join Date
    Dec 2010
    Location
    switzerland
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default

    hi alexander
    i discovered it a few days ago on rhino. will give it a shot this week as we do a lot of 3d scanning. thanx a lot.

    i use frozen fish sticks as parallels


  4. #4
    Registered aiem's Avatar
    Join Date
    May 2011
    Location
    Russia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default the last improvements

    Hi all, problems with the release built on October 28 have been fixed. In case of a new bug found, please use the corresponding form on the download page or send me an email directly. My best,

    Alexander


  5. #5
    Registered aiem's Avatar
    Join Date
    May 2011
    Location
    Russia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default version 2.00 is available

    Hi everyone,
    now the next release is available to download, it includes the 64-bit plug-in for Rhino 5 based on the newest engine of version 2.0. The same engine is used in the new stand-alone program versions as well. Please, visit Triangle Mesh Completer by Alexander Emelyanov. Mesh repairing tools - Rhinoceros plug-in & standalone program for details

    Alexander


  6. #6
    Registered aiem's Avatar
    Join Date
    May 2011
    Location
    Russia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default version 3.00

    Ladies and gentlemen,
    now the next version (3.0) is available on Triangle Mesh Completer by Alexander Emelyanov. Mesh repairing tools - Rhinoceros plug-in & standalone program .

    The main benefits of the new version are following:
    1. Simplicity of usage – in a majority of cases it is enough only to specify input and push the button “process”. All available possibilities to adjust the repairing in some particular cases are represented by 3 check boxes. Other settings are set up and managed automatically. This version doesn’t use any processing profiles.
    2. A special care to prevent appearance of residual holes in output result.
    3. A greater robustness in cases when the surface is represented by a set of isolated mesh pieces.

    Alexander


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

A new tool to fill gaps in triangle mesh models

A new tool to fill gaps in triangle mesh models