Install thermocouple in a hotend


Results 1 to 1 of 1

Thread: Install thermocouple in a hotend

  1. #1
    Registered
    Join Date
    Oct 2008
    Location
    Danmark
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Install thermocouple in a hotend

    Does anyone know how I can install a thermocouple, which is much smaller than the hole in the hotend?
    I remember something, that the thermocouple can not touch anything...
    It's thermocouple, not thermistor. Just bare wire at the tip.

    Thanks

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Install thermocouple in a hotend-dsc_0021-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Install thermocouple in a hotend

Install thermocouple in a hotend