Can anyone tell me if there is a way of checking the step & direction pulses from the printer port ,(either with software or hardware) as I have a problem
running these 3, dc servo motors and as Iam not sure whether
its the 320 gecko drivers or the computer.
All 3, 600oz/in ametek motors remain in a locked position with power applied and with no movement during running some gcode or trying to jog the axis using turbocnc,mach2and kcam.As soon as the wires are taken of the encoder the motor stats to spin.Bit like my head is starting to.
Anyone with any ideas or suggestions! |