When you say
I don't see much use for this, since most probably don't have an actual connection between their programming PC and their machine PC |
does this mean that some machines have a dedicated computer that drives the CNC machine and this program will allow a user to send a cutting file from another computer to the dedicated computer? If so, I would imagine that most users here would have the same computer that stores the cutting code as runs the CNC machine. Possibly I am not understanding what you are saying. If I am, then why cant users who have two computers just use an network connection to open the cutting file.
Lets say that the majority on this site use Mach 2. Don't they just browse to the place where the cutting file is and open it up, even if they have to browse to another computer?
To all those who know what this is all about I hope my ignorance is amusing you.
I am trying hard to understand all this.
If My understanding is right then I suspect that this program wont be used very much by the home users on this site.
Surely there is more to this program than just been a cutting file organizer?