080118-1226 EST USA
Robert Timby:
How long is your RS232 cable?
On HAAS the handshake (flow control) possibilities are XON/XOFF, DC codes, Xmodem, (these are all a software handshake), and RTS/CTS (hardware).
Try sending from HAAS to the computer. The program can be as simple as
% (this HAAS generates)
O0100 (this is generated by HAAS)
(this is a comment)
% (again HAAS generates this)
In other words what you see on your screen at HAAS is
(this is a comment)
I think that is enough to be valid.
At the computer you should receive
%
O0100
(this is a comment)
%
5 digits for the O number if it is a newer machine. 5 digits may have occurred at the same time as 115.2 kbaud.
. |