My setting are as listed
@ the computer:---------------- @ the Haas
Baud rate 115200 ----------------115200
parity even ----------------------even
data bits 7 -----------------------7
stop bits 1 -----------------------1
flow none ------------------------can not find it
dtr enable
rts enable
x on 17 --------------------------synchronization on/off
xoff 19
I will send the program and the haas says that it is loading it but never finishes, just keep saying loading data.
__________________
Rob Timby
Last edited by Robert Timby; 01-18-2008 at 11:12 AM.
Reason: alignment
|