Originally Posted by 1ctoolfool  thanks Geof, if you pay for the spare M functions do they include some type of interface board to connect to the relays or is it bare wire type screw terminals or what?
thanks
joev |
I think each relay on the bottom has screw terminals for the relay contacts: C, NO, NC.
And you don't need to pay for the first M functions they are included, it is just the cable and socket that is omitted. You can always install your own socket; I just find it convenient to get it done for me, the cost is reasonable.
I will take pictures inside one of my machines tomorrow if you like and identify the relays. Bug me with a PM if I forget
