Last I heard Stan does plan on finishing his designer when he has the time.
Switcher, Mach3 is now being developed by Brian Barker, who is now ArtSoft USA. Brian has been working with Art on Mach3 and LazyCAM for the last two years, in anticipation of Art's retirement. I doubt he'll be anywhere near as prolific as Art, but Mach will carry on as it always had. And Art has said that now that he will no longer be spending 18 hours a day on Mach3, that you may periodically see some Mach3 related goodies from him. He's retired from full time development, but is still around in the background.
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |