To return to the home "tool change" position. All you have to do is input an
M6. It shouldn't matter what position the spindle is in.
You should be able to stage tool 2 by entering T2.
Then change to that tool by entering M6.
I have 5 of these machines on my floor now. Three 3 axis, and two 4 axis.
Using mastercam x2 to program them. Have working posts.
Your mastercam reseller should provide you with a post, customized to your needs. However, I have found that this could take awhile. If you don't get what you want let me know.
If there is anything else I can do for you, let me know. I'd be glad to help.
-Jake |