This is the 1.5 dia pocket
The origin is the center
%
O0000 (T)
(MASTERCAM - X)
(MCX FILE - T)
(POST - %MCAMDIR%MILL\POSTS\MPMASTER.PST)
(MATERIAL - ALUMINUM INCH - 2024)
(PROGRAM - T.NC)
(DATE - JAN-09-2008)
(TIME - 6:38 AM)
(POST DEV - IN-HOUSE SOLUTIONS)
(T1 - 1/2 FLAT ENDMILL - H1 - D1 - D0.5000")
G00 G17 G20 G40 G80 G90
T1 M06 ( 1/2 FLAT ENDMILL)
(MAX - Z.25)
(MIN - Z-.025)
G00 G90 G54 X-.2229 Y.1133 S10000 M03
G43 H1 Z.25
G8 P1
Z.1
G94 G01 Z.01 F25.
G02 X.25 Y0. Z-.025 I.2229 J-.1133 F50.
G01 X.0469
G03 X-.2344 I-.1406 J0.
X.4219 I.3281 J0.
X.0906 Y.4816 I-.5156 J0.
X-.0906 Y-.4816 I-.0906 J-.4816
X.49 Y0. I.0906 J.4816
X.0906 Y.4816 I-.49 J0.
G01 Z.075 F385.
G00 Z.25
X-.375 Y.1768
Z.1
G01 Z-.025 F25.
G41 D1 X-.4634 Y.0884 F50.
G03 X-.5 Y0. I.0884 J-.0884
X.5 I.5 J0.
X-.5 I-.5 J0.
X-.4996 Y-.02 I.5 J0.
X-.4595 Y-.1069 I.1249 J.005
G01 G40 X-.3676 Y-.1916
Z.075 F385.
G00 Z.25
G8 P0
M05
G91 G28 Z0.
G28 Y0.
G90
M30
%
And this is the rectangular pocket. 2.0 in X and 3.0 in Y
Origin at the top left
%
O0000 (T)
(MASTERCAM - X)
(MCX FILE - T)
(POST - %MCAMDIR%MILL\POSTS\MPMASTER.PST)
(MATERIAL - ALUMINUM INCH - 2024)
(PROGRAM - T.NC)
(DATE - JAN-09-2008)
(TIME - 6:42 AM)
(POST DEV - IN-HOUSE SOLUTIONS)
(T1 - 1/2 FLAT ENDMILL - H1 - D1 - D0.5000")
G00 G17 G20 G40 G80 G90
T1 M06 ( 1/2 FLAT ENDMILL)
(MAX - Z.25)
(MIN - Z-.025)
G00 G90 G54 X1.3971 Y-1.7222 S10000 M03
G43 H1 Z.25
g8 p1
Z.1
G94 G01 Z.01 F25.
G02 X.8514 Y-2.0149 Z-.025 I-.4584 J.1997 F50.
G01 X.8225 Y-2.1775
X1.1775
X1.2507 Y-2.2507
X1.1775 Y-2.1775
Y-.8225
X1.2507 Y-.7493
X1.1775 Y-.8225
X.8225
X.7493 Y-.7493
X.8225 Y-.8225
Y-2.1775
X.7493 Y-2.2507
X.635 Y-2.365
X1.365
X1.4382 Y-2.4382
X1.365 Y-2.365
Y-.635
X1.4382 Y-.5618
X1.365 Y-.635
X.635
X.5618 Y-.5618
X.635 Y-.635
Y-2.365
X.5618 Y-2.4382
X.26 Y-2.74
X1.74
Y-.26
X.26
Y-2.74
Z.075 F385.
G00 Z.25
X1.3536 Y-.5
Z.1
G01 Z-.025 F25.
G41 D1 X1.1768 Y-.3232 F50.
G03 X1. Y-.25 I-.1768 J-.1768
G01 X.25
Y-2.75
X1.75
Y-.25
X1.
X.98
G03 X.8032 Y-.3232 I0. J-.25
G01 G40 X.6264 Y-.5
Z.075 F385.
G00 Z.25
g8 p0
M05
G91 G28 Z0.
G28 Y0.
G90
M30
%
As you can see, I turn on HSM with G8's so if you don't have that option, delete them  |