Arvid,
Glad you like the machines appearance. Nice feedback to have.
Yesterday the machines accuracy was checked with a dial indicator. At its worst point the measurement was .003"
Have not cut anything but MDF so far and that was just a few test cuts.
Machining and layout costs were $600.00. Aluminum for the frame came in at about $120.00. Parts were reasonable as they are the very ones I buy to resell.
For project log I in the process of trying to come up with a table top. I have made one already out of .75" MDF but have found I need to make it over again.
Priced mic 6 .50' x 22.5" x 30" @ $250.00.
Mike |