Hi Rally,
I am a machinery importer. I have recently started using the Mach3 software. We have assembled a machine with a 12" x 54" table and DC servo motors & Gecko drives. It works okay but I wanted more. So, I called overseas and found a 750kw AC servo motor with drives. This is about 20 inch pounds STALL not PEAK. The endcoders are 2500 count per rev. Enough torque that it could be direct mounted without belts or reduction. I bought 12 of them. They will be here in 2-3 weeks. I can sell a motor, drive, endcoder & 10' cable for $625. plus shipping. The torque alone was enough for me to go shopping for AC drives, but I was amazed how close the cost is by the time you add the DC motor, drive, endcoder, cable & Power supply up.
Thanks !!
Kirk Brown
Majestic Machinery, Inc.
626-336-2350 |