Do you need the tank AND the pump (and the coolant level sender)? If it's just a coolant collection problem, you could put virtually any plastic tub under the discharge area in the cabinet.
I don't know how familiar you are with the shape of the tank but there really isn't much to it aside from being a big steel tub with a lid on it, an inlet funnel and a pump.
I'd beat on that guy on eBay (if you only need the sheetmetal portion of it).
As I posted before, the HFO in Torrance had a couple of older tanks in their service area. You might give them a call:
Haas Factory Outlet
CNC Machine Tools
580 Madrid Avenue
Torrance, CA 90501
Phone: (310) 381-0750
Fax: (310) 381-0744
If you actually need the whole coolant tank and pump assy, I think you're going to have a tougher go of it. It's not impossible but it might take you some time to find it.
__________________
Greg |