Hi all.
Hope this is not off topic here.
I need to cut a rectangular alluminium piece to create a dovetail joint as explained in
http://wapics.free.fr/machines/fraiseuse/pparonde02.gif but I dont own yet an angular vise to keep the piece and the mill I own is able to rotate the motor only toward the Y movement, which is too short to work a 20 cm piece.
Can you supply me some ideas to achieve this resultat without buying the vise, and using only 4t end mills ( if this is possible ?)
Pigi
P.s. Sorry for my bad english, and ask me if this is not clear