SRT
I have not seen the version that you mention. With our Onecncxp expert I have looked at it generating the simulated rendered machined model line by line of NC code. All you need to do is in verification function click the increment of steps you want, it seems to be set at 20 lines by default for stops to generate the model. I have set it at one line and used it like that just to confirm difficult bits and even clicked line by line by clicking continue. I am so confident with it that I just let it run because it reports any problems if any. There has never been so far because it checks your settings and seems to report them before you actually make the program. I have even been reminded that I have selected the wrong tool before making the program it told me that the tool selected would not make a good finish. Some of our programs are more than 100,000 plus lines in one program and to watch that simulate is just not really feasible and would not do anything for me anyhow. I tried it just te see what it can do anyhow.
I hope this helps  |