Originally Posted by hoyospetrola  Hello, I'm working in a simillar proyect DIY and but I couldn't find yet any supplyer to the the cutting laser, please could you tell me where did you buy your laser Synrad T60? how much you pay for that? can you cut steel? what thickness? I'll will really apreciate your answer.
Many thanks |
I've been offline from the site for a while and did not know you had asked a question. If it's still useful info the T60 I bought from Laser Resale on eBay. They had 6 of them and I got the last one. The 10W laser, the J48 I bought directly from Synrad. I will be selling the 10W some time soon now that I have my system finished and running well.
No I don't cut any metals, and don't think the T60 would cut steel in any case. I cut wood up to 1 inch thick though it is pretty slow at that thickness. Mostly I work in baltic birch plywood and poplar board. Many of my works are 1/4 inch assemblies and poplar is great to work with at 30 watts.
Hope this helps...
Wil
PS: web site is
http://www.pyroplotter.com