(Mastercam’s verification is just a visual reference. ) Pretty much true. it does help to catch some things but once again is prior to G-code. Now we are talking about a different hand on the True Verification side.I have Predators CNC Verify when needed.
Vericut is good software, as I have been trainned and used to have it that to.
On the STL side use what brandou101 did and one you have the solid you can make that into a single STL to use in Verify.
__________________
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Mastercam Instructor , Programming Consultant and ME (Manufacturing Eng) |