Ok then, how about an RFQ for the parts? I had originally posted on a newsgroup for an RFQ, unfortunately I hadn't had all the information needed, and didn't draw much attention.
So I did a bit more research, and a bit of redesign. And have finally came up with something final.
I'm going to try and post pictures of just one of the pieces. The other piece is almost identical. If anyone is interested in quoting them, send me an email at
dab_design@sutv.com or a message here and I can send the cad file and notes on some of the dimensions and things.
Quantity will be 100 of both pieces. Will probably need them in intervals of 20 pieces each per month. With the posibility of more after the total 100 pieces are shipped.
And here's my attempt at posting pictures......