Yes..same MechWerks! Sorry I didn't realize the connection.
Just started to get 24 hours out of a day and now want to see if 26 is possible with a CNC mill.
From what I have seen, the 325 is listed as 80" tall. That is why I was surprised that removing the quill cover only took it down enough to squeek under a 79" door...so I guess I have not figured things out yet.
It seems a contol conversion would be the way to go. PC based controls allow a lot of potential change by just loading software and not a lot of hardware changes (which seem extreemely expensive in the industrial market).
I started following some of your various posts on this forum and another..giving me a lot of information for thought. Thank you for taking the time to put up some of your experience for us less informed to follow.
__________________
MechWerks |