Hi Kyle,
I really cannot see the point in putting together something that hangs off of the M00/M01 command!
I am chasing the TOTAL cycle time for the job, from the time the job went in to the machine to the time it comes out of the machine.
This is why I have a Timestart program and a TimeStop program.
As for writing the zeroset information to a network file, I do not believe that I can write directly to a network location from the machine. (will have to check to be certain, but I seem to recall trying this some time ago!)
I agree, writing information to a file straight after using the probe is probably the easiest method to use, rather than doing it at the end of the program.
Still need to give more thought to the whole idea.
Cheers
Brian. |