Hello all I am brand new to the forum. I am a guitar builder based out of mid missouri but I am typing cause I am need of some help. I am in the process of building a pantograph router that is based on the gemini carver I pretty much got most of the parts sourced but I am needing some measurements so I was wondering if anyone out there has a gemini if they could help me here are the two measurements I need.
1st from the table to the top of the rail and 2nd fromthe bar that joins the pillow blocks to the outside edge of the stylus.
http://s142.photobucket.com/albums/r...ent=celloo.jpg
All help is much apreciated cheers.