First of all sorry for my bad English.
Hello
I want your opinion about a power Supply that I have to build (not me)!
Here Is the Facts
-I have a 5 axis Servo controller.!
5 Axis Large Mill / Router (Package Deal 026)
http://www.lowcostcncretrofits.com/2...rvosystem.html[/
My motors are
http://www.motioncontrolgroup.com/pr...formance-specs
Voltage rating up to 90 Vdc
Rated Speed: 4000 RPM
Rated Power: 245 watts (0.33 HP)
Current at Cont. Stall Torque, o-peak A dc 5.56 Amp
Current at Peak Torque, o-peak A dc 38.93 Amp
Resistance, L-L R 1.33 ohms
I need 4 Axis.!
There is a label on my controller that says
"Max Input voltage 80V DC"
The Question:
What power supply I have to order for this configuration.???
I asked a friend of mine and says that a 75V DC 30A is fine.... (cost about 500 US$
Can you please tell me your opinion?
Thanks..!
George