I am going with the SHM1530A and the chinese vacume table and pump with dust collector, Mist cooling system and tool sensor. I figure all that will be about $18,000 and even if it takes $2,000 to get it here I am going to get a whole lot more machine for $4,000 LESS than a shop sabre outfit.
what do you think is the difference in the Becker vacum VS the chinese vacum other than $1,500 less for the chinese one?
actually the chinese is 140CBM vs beckers 129CBM
I know that fourms are very hard to guage when asking what is the best machine to buy. You get comflicted answers. Fourms are better for questions once you get the machine. If some one asked what the best Airbrush is I'd say Iwata and the best vinyl printers and plotters I'd say Roland because those are what I own so everyone on here likes what they have bought themselfs. I am very convinced that SH-cnc is a straight company just watch the video on the home page there must be 300 people working there. I still really like that SHMS1224D for $42,000 but it is only a 4x8 and I am starting to look at the 5x10 so i can cut aluminum race car tin .04 alum for race car panels for local builders.
To the ausies do you fallow the World of Outlaws sprint car races. I don't know if that is what they are called there but Donny Schatz, Natalie Sather and one other guy from Fargo, ND (my town) race that circit in the US summer than are in Australia now racing then they are back to the us to race the summer seris again. we also had a group of guys that were custom combiners that used to come here from Australia every summer to custom combine the mid west Wheat.
well talk to you later I want to know what size and options you two got on your excite cnc's
se ya  |