I am relatively new to CNCZone as well as CNC routing. I recently purchased a one year old CNC router equipped with a WINCNC powered Controller. The WinCNC is Version 2.2.02. Upon inspecting the INI settings there are several settings such soft limits, g28 settings and tool changer that are not set correctly. I have contacted the manufacturer of this router and they requested that I send to them the WINCNC.INI and CNCSCRN.INI files. I sent these files to them in early Oct and they have consistently found delays in helping me. Therefore, I am in need of help from someone who knows how to correclty write INI settings.
Thank you.
FFAMN |