Man, what an eye for details......OSHA would have a job for you! I had to look back at the photo's to find out which one had the dust in it.
One of my first drawings I am working on is a dust shoe for the machine. Should be easy enough to do since the router had 4 bolt holes in the bottom.
My workshop is currently in a bit of a shambles since we are getting ready to move over the summer. I have a dust system ready to be installed in the new shop that is hooked up to all my machines. Actually, my dad was the big push on this. He has his shop in his basement and he has about 10-12 machines hooked up to a small cyclone and bag filter system. He has a remote control unit on it that hangs around his neck, so he pushed the button and it turns on/off without having to walk across the shop.
__________________
Paul Riedlinger
Let the chips fall where they may...I'm not going to clean them up!
Last edited by paulried; 05-19-2003 at 11:55 PM.
|