Don't take it to heart, it was their #1 post on the site.
I enjoyed podcast #2.
Since I am about as new to CNC as you can get, I am always looking for good solid information. There seems to be a growing number of us newbies that wants something more from our routers, mills or lathes. It is hard to differentiate good information from bad sometimes.
Ultimately, I would like to turn my CNC router into something that generates income. (Oh wait, I have to build it first!)
I believe this is where a lot of mom & pop businesses get their start.
Initially, it is kind of difficult to implement your thoughts on a full pallet run when 90% of our projects are 1-offs.
Good luck. I will be tuning in to see what you come up with in future podcasts. You may graduate to video segments if it really takes off.
__________________
Ōz@®KÇÑÇ |