Originally Posted by project5k  yea, i realize this, but as for right now i really dont have the materials for it.
i wonder if some 1" thick t6061 would hold up as a new table top if i were to slot it for my tnuts. (i'm not using a vice to hold my work as of yet.
maby theres a better way, some sort of extruded profile that i could just bolt down rather than having to slot it myself. |
I bought some T-slot profile on eBay UK from MarchantDice - I'm sure there's something similar available on your part of the globe.
That said, I think you might be better off simply driling and tapping a matrix of holes onto a piece of cast-tooling plate.It's not expensive, and is mega flat on the front and back.