[QUOTE=ToyMaker;340636]this is the best (and easiest) one I have seen on the 'net.
http://aardvark.co.nz/pjet/qctp.shtml
robotic regards,
Tom
I just made this one out of steel and the center part is good and sterdy
but the part that holds the cutter is really hard to clamp so im going to make one out of aluminum and keep the center steel as it is really strong no flex what so ever. i bought a qctp and i hate it there is so much flex in that thing.
i'd rather use the one that came with my machine and just use shims.