Originally Posted by steer  parameter 907 on machine with parts counter read "01011010" on the other machine with no counter it reads "01001000" , so 2 bits are changed?
It's been awhile, also forgot how to enable PWE to change paramter. |
No
On Fanuc O-T for enable PWE press "Param/Diag" and with "Page up" or "Page Dw." go to SETING 2 screen (in MDI mode) and set PWE to 1
param. 907 bit #7 #6 #5
#4 #3 #2
#1 #0
bit#4 For Run Time and Parts Count Display set param 907 bit 4 to 1
bit#1 is for 2nd Aux. function