Originally Posted by vtxstar  Much so. Check out littlemachineshop.com
They have an information section that compares all the makes of these lathes and mills - though I don't recall seeing the Princess model. |
Good afternoon, all. First time poster, medium time lurker here.
The Princess model (I picked one up on Saturday) is the Sieg 300. Princess Auto was not (at the store here in Regina) advertising it as a PowerFist model per se. This model used to also be marketed as the MicroMark 82500 7x12, correct? Anyway after getting it set up I have to say I'm pretty impressed. I'd read about all manners of adjustments having to be done but mine seems to run straight and true right out of the box.