Originally Posted by per.e  Pontus.
If you need any help you can contact me via e-mail "per.ekdahl at comhem.se".
I am using Mach3 to control my router and it is a fantastic program with many features. http://www.artsoftcontrols.com/forum/index.php
Per |
Pontus pay attention to Per about Mach3 software. Unless you already know a lot about linux, you will be spending all your time trying to get it to run rather than building the machine.
I might also suggest you lay out an overview of your build plan, make a list of materials needed and then post those here. You never know, someone might have something they could help you out with and would allow you to come in on budget.
Mike