Originally Posted by dgoddard  To continue, that worked fine. Thanks for the help. I find the MadCam tutorials lacking detail and have had to hunt/peck to feel my way thru. My problem now is to get "Simulate" to run correctly. As a test I drew a box, raised the Z, loaded a cutter, selected a process, and created tool cut paths. All looked OK to that point. When I click on the "Simulate" button I get the "Cut simulation error. The stock model will reset.". When I hit OK, Rhino freezes and will not respond. Have to do a Ctrl-Alt-Del to get out of program. Any hints as to problem? Have tried re-downloading MadCam but does not solve problem. I'm probably doing something wrong, but have been unable to figure it out. |
dgoddard,
Mike (turmite) here. I am a reseller of Madcam here in the US and would like to let you know that the tutorials and help files for Madcam are being re-written now. Any suggestions would be appreciated. Pm me for my email address and while we're at it I will also try to help with your problem. I had a death in the family this past week and haven't spent much time here.
Mike