I'm willing to spend the extra money up front, to get something that will last in an industrial environment. I'd like to use it to cut 1/8" aluminum sheet as well. My main question is accuracy.
We are making high end instruments, and if the fret spacing is out, the guitar will never intonate properly.
I've been scared off of K2 from the threads in their forum. It looks quite amatuerish at best. It's made me consider getting in the business of making these routers myself. The question is time for R & D.
__________________
"It's only funny until some one get's hurt, and then it's just hilarious!!" Mike Patton - Faith No More Ricochet |