Okuma MC-6V OSP 3000m Program loading Problem | |
am useing a Okuma MC-6V 3000m CNC controled with Cimnet DNC BTR and am haveing trouble loading programs or even finding the procedure to do so...useing bob cad i can get the program into the Cimnet DNC BTR then change it to BTR Memory -> Control from there i go to the machine itself put it into memory mode and look through the buffers and cant find anything...i was told to go to load mode on the Machine itself but cant seem to find a load key anyware dont have any experance with this machine so any help would be appreciated...
thanx
Chris
Last edited by ChrisProphet; 09-04-2007 at 11:05 AM.
|