Ok, been a while. Made allot of progress on my build.
I am doing all the other things, but i am going to be meeting a bottleneck in my project, and thought i might start asking for help now.
I have all my electronics already, u have all the parts i need (except for a resistor i think i need), but i am having a hard time figuring out how to wire it all together.
So, First the Parts List:
Motors:
KL34H295-43-8B from Keling Inc
Controllers:
Gecko 201's
Power Supply:
KL- 7212 from Keling
Breakout Board:
C11 from cnc4pc
I'm confused by the whole matter.
I've got allot of wires, but i don't know where to connect most of them.
Can anyone point me to a diagram? I'd much appreciate it.
Also,
If i need to go farther than the existing cables, What guage wire should i use?
I'm mostly confused by the red black and green wires on my power supply. The instructions tell me to combines the red and black wires in a certain way for my 110 power, but i dont know where to put them after that.
Is "Hot" negative or positive? (from the specs sheet)
Also, Am i missing another power supply to provide 5v to anything? or can i get 5v from something i have listed?